The Window Monitor
Get a quote

Local research · updated July 2026

Awning windows in Brownsville, Texas

Top-hinged sash that opens outward from the bottom. For Brownsville's comparatively newer housing stock (though 30.6% of homes still predate 1980), awning window replacement is a common project — and in the ENERGY STAR Southern zone, the number that matters most is a low SHGC (≤ 0.23) to block solar heat.

Short answer

Awning windows in Brownsville typically cost $325–$1,460 installed per opening. The low end is a mid-grade vinyl insert from a regional installer; the top is a premium frame, a full-frame installation, or a full-service national brand.

NREL REMDB + BLS PPI, localized to Brownsville (BEA Regional Price Parity, 2024). How we estimate →

$325–$1,460

installed range per opening for Awning window, from a mid-grade insert up to a premium or full-frame job

Source: NREL REMDB + BLS PPI, localized to Brownsville

30.6%

of Brownsville homes were built before 1980

Source: U.S. Census Bureau, 2019–2023 ACS 5-Year Estimates

SHGC ≤ 0.23

the ENERGY STAR v7.0 number that matters most in the Southern zone

Source: EPA ENERGY STAR v7.0

Is a Awning window right for a Brownsville home?

Crank opens the sash outward; sheds rain while venting.

Where it fits:

  • Ventilation during rain
  • High placements and pairing under picture windows
  • Basements (larger egress variants aside)

What to weigh:

  • Limited opening size; not an egress solution in most sizes

Awning windows and Brownsville's climate

Brownsville sits in the ENERGY STAR Southern zone (IECC zone 2A (hot, humid), Cameron County), where the priority is a low SHGC (≤ 0.23) to block solar heat.

A awning closes against a compression seal, the tightest of any operable window — good for holding conditioned air inside through a long Southern-zone cooling season.

New to these numbers? See our plain-English guide to U-factor and SHGC.

What Awning windows cost in Brownsville

Awning window replacement in Brownsville runs $325–$1,460 installed. The low end is a mid-grade vinyl insert from a regional installer; the top is a premium frame, a full-frame installation, or a full-service national brand. RGV pricing is generally moderate. Low-SHGC packages are the material priority. Federal 25C is gone. Itemize NFRC SHGC and U-factor.

That's the national range shifted to Brownsville's cost level using the BEA Regional Price Parity for Brownsville-Harlingen, TX (86, U.S. = 100; 2024). How we estimate local costs →

For a breakdown by frame material and install type, see our full cost guide.

Rebates & incentives in Texas

The federal window tax credit (25C) ended for projects placed in service after December 31, 2025. If your windows were installed in 2025, you can still claim it on your 2025 return — but for new projects there is no federal window credit. State and utility programs are now the main source of window incentives.

Texas accepted IRA rebate funding but program rollout has lagged; check the State Energy Conservation Office for current status before counting on it. See our Brownsville guide for the full program list.

Awning windows in Brownsville: FAQ

›What efficiency numbers should a Awning window in Brownsville meet?

Brownsville sits in the ENERGY STAR Southern zone (IECC 2A (hot, humid)). Qualifying units need a U-factor of 0.32 or lower and an SHGC of 0.23 or lower. A awning closes against a compression seal, the tightest of any operable window — good for holding conditioned air inside through a long Southern-zone cooling season.

›How much does Awning window replacement cost in Brownsville?

A useful planning range for Awning window replacement in Brownsville is $325–$1,460 installed. The low end is a mid-grade vinyl insert from a regional installer; the top is a premium frame, a full-frame installation, or a full-service national brand. RGV pricing is generally moderate. Low-SHGC packages are the material priority. Federal 25C is gone. Itemize NFRC SHGC and U-factor.

›Do I need a permit to replace Awning windows in Brownsville?

Replacement generally requires a permit, and new units must meet the current energy code. See our Brownsville guide for local permitting and rebate details, and always confirm your installer pulls the permit.

Sources

  • — U.S. Census Bureau, American Community Survey 5-Year Estimates (B25034, B25035)
  • — EPA ENERGY STAR Version 7.0 Residential Windows specification
  • — DOE/PNNL IECC climate zone assignments by county
  • — NREL residential window cost analysis (planning ranges)